Back to Top
CNC Tips Selection
-
Posted: August 04, 2023Categories: CNC Tips SelectionRead moreEASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.
Please send email to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.
The CNC tips selection are basically produced by our technology & service team for education purpose.
Please kindly share your opinion if anything that may require improvement or correction.
Many thanks for your support!
Website: www.easycnc.com
Email: sales@easycnc.com
Welcome to EASYCNC online shopping for spare parts & test stands!
Fanuc Series 18i–TB A02B-0283-B500 SRAM FROM data backup restore (replace CPU A20B-3300-0600 with A20B-3300-0311 or A20B-3300-0310 for FROM operation is required)
18i–TB A02B-0283-B500 configurations:
LQ10D36A
A20B-8100-0661
A20B-3300-0392
A20B-3300-0280
A20B-3300-0600
A20B-8101-0180
A20B-3900-0220
A20B-8001-0920step 1. backup SRAM data from original A02B-0283-B500 with CPU A20B-3300-0600
step 2. try to backup FROM data from original A02B-0283-B500 with CPU A20B-3300-0600, however, it does not work. in order to solve the problem, replace CPU A20B-3300-0600 with A20B-3300-0311 or 0310, then backup FROM data from original A02B-0283-B500 with CPU A20B-3300-0311 or 0310
step 3. restore FROM data to new A02B-0283-B500 with CPU A20B-3300-0311 or 0310
step 4. replace CPU A20B-3300-0311 or 0310 with A20B-3300-0600, then restore SRAM data to new A02B-0283-B500 with CPU A20B-3300-0600
step 5. all SRAM and FROM data are done, and the new A02B-0283-B500 with CPU A20B-3300-0600
SRAM and FROM data backup and restore for Fanuc Series 18i-TB A02B-0283-B500 with CPU A20B-3300-0600
Posted: August 04, 2023Categories: CNC Tips SelectionRead moreEASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.
Please send email to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.
The CNC tips selection are basically produced by our technology & service team for education purpose.
Please kindly share your opinion if anything that may require improvement or correction.
Many thanks for your support!
Website: www.easycnc.com
Email: sales@easycnc.com
Welcome to EASYCNC online shopping for spare parts & test stands!
Fanuc Series 18i–TB A02B-0283-B500 SRAM FROM data backup restore (replace CPU A20B-3300-0600 with A20B-3300-0311 or A20B-3300-0310 for FROM operation is required)
18i–TB A02B-0283-B500 configurations:
LQ10D36A
A20B-8100-0661
A20B-3300-0392
A20B-3300-0280
A20B-3300-0600
A20B-8101-0180
A20B-3900-0220
A20B-8001-0920step 1. backup SRAM data from original A02B-0283-B500 with CPU A20B-3300-0600
step 2. try to backup FROM data from original A02B-0283-B500 with CPU A20B-3300-0600, however, it does not work. in order to solve the problem, replace CPU A20B-3300-0600 with A20B-3300-0311 or 0310, then backup FROM data from original A02B-0283-B500 with CPU A20B-3300-0311 or 0310
step 3. restore FROM data to new A02B-0283-B500 with CPU A20B-3300-0311 or 0310
step 4. replace CPU A20B-3300-0311 or 0310 with A20B-3300-0600, then restore SRAM data to new A02B-0283-B500 with CPU A20B-3300-0600
step 5. all SRAM and FROM data are done, and the new A02B-0283-B500 with CPU A20B-3300-0600Recent PostsPopular Posts
